How to Put a Doona Cover On: Two Simple Methods

01 / Before you begin

Set up the two layers

• Check the cover and insert dimensions. Measure an existing insert when replacing only its cover.
• Open the zip, buttons or other closure.
• Identify the top corners and the opening end.
• If the product has internal ties or loops, use them as directed.

Lay the pieces on the bed so you can reach each corner. Rectangular inserts need their long and short sides aligned with the cover.

02 / Hold the top corners

Method 1: turn the cover inside out

1. Turn the quilt cover inside out.
2. Put your hands through the opening and take hold of the two top corners from inside the cover.
3. Grasp the corresponding top corners of the quilt insert through the cover fabric.
4. Keep hold of both corners and let the cover turn right-side out over the insert.
5. Ease the cover down, place the bottom corners correctly and smooth the quilt across the bed.
6. Check any ties or loops, then close the cover using its own fastening.

Existing demonstration from Crane & Canopy:

03 / Start at the closed end

Method 2: roll the layers together

1. Turn the cover inside out and lay it flat, with the opening at the foot of the bed.
2. Lay the insert on top, aligning all edges and corners. Attach any supplied corner ties as directed.
3. Starting at the closed head end, roll the insert and cover together towards the opening.
4. At the opening, turn the cover’s opening over the ends of the roll so the rolled insert is enclosed inside the cover.
5. Close the cover, then unroll towards the head of the bed.
6. Smooth the layers and check that every corner is seated correctly.

Watch the existing Crane & Canopy roll-method demonstration.

04 / Check the fit

Empty corners or a quilt that bunches?

• Check the size: finished cover and insert dimensions should match.
• Check orientation: align the long and short sides.
• Seat the corners: ease every insert corner into the corresponding cover corner before fastening.
• Use supplied ties: attach them to the insert’s loops only when both products provide them.
• Smooth gently: lay the quilt flat and redistribute it without forcing seams or the closure.

A larger cover does not add filled coverage to a smaller quilt. If you change the quilt size for more drape, choose a matching cover; fitted sheets still need to fit your mattress.

A fresh cover, with the right measurements

Keep the insert’s dimensions beside you as you choose a new design. Check set contents, closures and care for the selected product rather than assuming all covers finish the same way.